Home › Vehicle Exterior › LIGHTING (EXT) › FRONT TURN SIGNAL LIGHT ASSEMBLY › from 2015.04
RM19V0EQ _59 Vehicle Exterior _014621 LIGHTING (EXT) _0163944 FRONT TURN SIGNAL LIGHT ASSEMBLY G

LIGHTING (EXT)  FRONT TURN SIGNAL LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81520 1.INSPECT FRONT TURN SIGNAL LIGHT ASSEMBLY LH

a.
E314624C01
2.042,0.927 2.458,0.51 false 1.625,0.906 1.167,0.469 false 0.229,0.188 0.542,0.531 0.313,0.344 10 false *a 2.448,0.323 2.885,0.563 0.438,0.24 10 false E 1.104,0.292 1.542,0.531 0.438,0.24 10 false B
*a Component without harness connected
(Front Turn Signal Light Assembly LH)


Apply battery voltage to the front turn signal light assembly LH and check that the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
Daytime running light LH comes on


If the result is not specified, replace the front turn signal light assembly LH.


Hide 81510 2.INSPECT FRONT TURN SIGNAL LIGHT ASSEMBLY

a.
E314624C01
2.042,0.927 2.458,0.51 false 1.625,0.906 1.167,0.469 false 0.229,0.188 0.542,0.531 0.313,0.344 10 false *a 2.448,0.323 2.885,0.563 0.438,0.24 10 false E 1.104,0.292 1.542,0.531 0.438,0.24 10 false B
*a Component without harness connected
(Front Turn Signal Light Assembly RH)


Apply battery voltage to the front turn signal light assembly RH and check that the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
Daytime running light RH comes on


If the result is not specified, replace the front turn signal light assembly RH.