Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2015.04
RM19V0EQ _58 Vehicle Interior _014608 METER / GAUGE / DISPLAY _0074143 METER / GAUGE SYSTEM W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Warning.


v.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.


Warning
Tester Display Description Default Setting ECU
Key Remind Sound Function to change the cycle of the key remind warning buzzer Slow 00:Normal,01:Slow,10:Fast Combination Meter Assembly
Flasher Sound Volume Adjustment Function to change to flasher sound volume Medium 10:Large,00:Medium,01:Small Combination Meter Assembly
50006 7