Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2015.04
RM19V0EQ _59 Vehicle Exterior _014621 LIGHTING (EXT) _0074253 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 52562F 1.INSTALL REAR BUMPER UPPER SIDE RETAINER

a.
E301005

Engage the claw to install the rear bumper upper side retainer as shown in the illustration.


Hide 81550H 2.INSTALL TAIL AND STOP LIGHT BULB

a.

Install the tail and stop light bulb to the tail and stop light socket.


b.
E314714

Turn the tail and stop light socket with the tail and stop light bulb as shown in the illustration to install them as a unit.


Hide 81550L 3.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear turn signal light socket.


b.
E314712

Turn the rear turn signal light socket with the rear turn signal light bulb as shown in the illustration to install them as a unit.


Hide 81562A 4.INSTALL REAR COMBINATION LIGHT GASKET

a.
E314710

Install a new rear combination light gasket.