Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER › from 2015.04
RM19V0EQ _59 Vehicle Exterior _014623 EXTERIOR PANELS / TRIM _0074269 REAR SPOILER A

EXTERIOR PANELS / TRIM  REAR SPOILER  INSTALLATION  


PROCEDURE

Hide 76085 1.INSTALL REAR SPOILER SUB-ASSEMBLY

HINT:

When installing a new rear spoiler sub-assembly, heat the vehicle body and rear spoiler sub-assembly using a heat light.


Heating Temperature:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Spoiler Sub-assembly 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the vehicle body, rear spoiler sub-assembly excessively.


a.

Install the 2 stud bolts to the rear spoiler cover.


b.

Install 2 new gaskets to the rear spoiler cover.


c.

Install 4 new clips to the rear spoiler cover.


d.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove any remaining double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



e.

Using a heat light, heat the vehicle body and a new rear spoiler sub-assembly.


f.

Remove the release paper from the rear spoiler sub-assembly.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



g.
B401581

Engage the 4 clips.


h.

Install the rear spoiler sub-assembly with the 2 nuts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 64719A 2.INSTALL LUGGAGE COMPARTMENT DOOR COVER