When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Name Plate or Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, name plates or emblem excessively.
75431
1.INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the vehicle body and a new luggage compartment door emblem.
Remove the release paper from the luggage compartment door emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Engage the 2 pins and install the luggage compartment door emblem.
75442
2.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the vehicle body and a new No. 2 luggage compartment door name plate.
Remove the release paper from the No. 2 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 luggage compartment door name plate as shown in the illustration.
| *a | Release Paper | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 24.4 mm (0.961 in.) | B | 25.0 mm (0.984 in.) |
| C | 47.1 mm (1.85 in.) | - | - |
75443A
3.INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Using a heat light, heat the vehicle body and a new No. 3 luggage compartment door plate.
Remove the release paper from the No. 3 luggage compartment door plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 3 luggage compartment door plate as shown in the illustration.
| *a | Release Paper | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 29.2 mm (1.15 in.) | B | 22.1 mm (0.870 in.) |
| C | 51.4 mm (2.02 in.) | D | 26.7 mm (1.05 in.) |
| E | 19.9 mm (0.783 in.) | F | 51.2 mm (2.02 in.) |
| G | 45.4 mm (1.79 in.) | H | 61.5 mm (2.42 in.) |
| I | 53.8 mm (2.12 in.) | J | 19.5 mm (0.768 in.) |
| K | 16.0 mm (0.63 in.) | L | 54.9 mm (2.16 in.) |
| M | 48.8 mm (1.92 in.) | N | 77.9 mm (3.07 in.) |
| O | 52.9 mm (2.08 in.) | P | 48.8 mm (1.92 in.) |
| Q | 79.0 mm (3.11 in.) | R | 52.9 mm (2.08 in.) |
| S | 48.5 mm (1.91 in.) | T | 76.7 mm (3.02 in.) |
| U | 53.6 mm (2.11 in.) | - | - |