Home › Engine / Hybrid System › 2AR-FE INTAKE / EXHAUST › EXHAUST MANIFOLD › from 2015.04
RM19V0EQ _51 Engine / Hybrid System _014577 2AR-FE INTAKE / EXHAUST _0073950 EXHAUST MANIFOLD A

2AR-FE INTAKE / EXHAUST  EXHAUST MANIFOLD  REMOVAL  


PROCEDURE

Hide 53852K 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (for RHD)

Hide 53851Z 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)

Hide 51442C 3.REMOVE ENGINE UNDER COVER LH

Hide 51441C 4.REMOVE ENGINE UNDER COVER RH

Hide 17410 5.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A266362

Disconnect the heated oxygen sensor connector.


b.
A254747

Remove the 2 bolts, 2 compression springs and 2 nuts.


c.

Remove the front exhaust pipe assembly from the exhaust pipe support.


d.

Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.


Hide 17118 6.REMOVE MANIFOLD STAY

a.
A195975

Remove the bolt, nut and manifold stay.


Hide 17139 7.REMOVE NO. 2 MANIFOLD STAY

a.
A209598

Remove the bolt, nut and No. 2 manifold stay.


Hide 17167 8.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

a.
A209579

Remove the 4 bolts and No. 1 exhaust manifold heat insulator.


Hide 89467B 9.REMOVE AIR FUEL RATIO SENSOR

Hide 25051 10.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

a.
A195979

Remove the 5 nuts and exhaust manifold converter sub-assembly.


b.
A298535

Remove the exhaust manifold to head gasket.


Hide 17168 11.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

a.
A211654

Remove the 2 bolts and No. 2 exhaust manifold heat insulator.


Hide 25586 12.REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

a.
A211653

Remove the 4 bolts and No. 1 manifold converter insulator.