Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY › from 2015.04
RM19V0EQ _59 Vehicle Exterior _014621 LIGHTING (EXT) _0074255 LICENSE PLATE LIGHT ASSEMBLY A

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 64719A 1.REMOVE LUGGAGE COMPARTMENT DOOR COVER

Hide 2.REMOVE LUGGAGE COMPARTMENT DOOR UPPER OUTSIDE GARNISH LH

Hide 81270 3.REMOVE LICENSE PLATE LIGHT ASSEMBLY

a.
E226675

Disconnect the connector.


b.

Disengage the 2 claws and remove the license plate light assembly.


Hide 81274B 4.REMOVE LICENSE PLATE LIGHT PACKING

a.
E226676

Remove the license plate light packing.

NOTICE:

Do not reuse the removed packing. Be sure to install a new license plate light packing to prevent water ingress.



Hide 5.REMOVE LICENSE PLATE LIGHT LENS

a.
E255008C05
1.365,1.813 0.635,1.813 false 0.969,1.552 0.594,1.271 false 0.479,1.719 0.646,1.865 0.167,0.146 10 false *1 0.406,1.167 0.573,1.313 0.167,0.146 10 false *a
*1 Protective Tape
*a Insert into the hole


Insert a screwdriver wrapped with protective tape into the license plate light lens hole, tilt it in the direction shown in the illustration and disengage the 2 claws to remove the license plate light lens.


Hide 81270B 6.REMOVE LICENSE PLATE LIGHT BULB

a.
E255009

Remove the license plate light bulb.