17335
1.INSPECT INTAKE AIR CONTROL VALVE ACTUATOR (for TCV)
Check the intake air control valve actuator (for TCV) operation.
| *a | Component without harness connected
(Intake Air Control Valve Actuator (for TCV)) |
Check that the motor operates when the battery is connected to the terminals of the intake air control valve actuator (for TCV).
Apply battery voltage for 1 to 3 seconds.
If battery voltage is applied for more than 3 seconds, the intake air control valve actuator (for TCV) may be damaged.
If the positive (+) and negative (-) battery leads contact the sensor terminals, the intake air control valve actuator (for TCV) may be damaged.
| Tester Connection | Specified Condition |
|---|---|
| Positive (+) battery voltage applied to terminal 4 (M-), and negative (-) battery voltage applied to terminal 5 (M+) | Gear rotates clockwise |
| Positive (+) battery voltage applied to terminal 5 (M+), and negative (-) battery voltage applied to terminal 4 (M-) | Gear rotates counterclockwise |
If the result is not as specified, replace the intake air control valve actuator (for TCV).