COWL TOP SIDE UPPER PANEL (for RHD) > ASSEMBLY REPLACEMENT
With the cowl top to apron brace removed.
REMOVAL
Symbol meaning
Remove Weld Points
Cut with Disk Sander etc.
INSTALLATION
Symbol meaning
Plug Weld
INSTALLATION POINT
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
After welding the cowl top side panel inner and hood stopper reinforcement to the vehicle side, install the cowl top side panel.
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.