BODY PANEL SEALING > APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    HINT:
    1. Apply degreasing agent to a clean cloth and clean the sealer application areas.
    2. After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.
    3. If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the sealer immediately.


K100445
Flat Finishing
K100446
No Flat Finishing

K101375


K101376


K102142


K101377E01


K101378E01


K101379


K101380