AUTOMATIC TRANSAXLE SYSTEM > GENERAL



OUTLINE
  1. The U241E 4-speed Super Electronically Controlled Transaxle (Super ECT) is used.



  2. This automatic transaxle is equipped with a Multi-mode Automatic Transmission function.


    X108313

  3. A transmission control cable assembly with a length adjustment mechanism is used. For details, refer to the Repair Manual.

  4. A shift pattern is provided that has an S position to the side of the D position.

  5. A shift lock system is used.



  6. A shift lock release button, which manually overrides the shift lock mechanism, is provided.


    X107128E01


SPECIFICATION
  1. Automatic Transaxle Assembly

    Transaxle Type
    U241E
    Combination with Engine
    1AZ-FE
    Gear Ratio*1
    1st
    3.943
    2nd
    2.197
    3rd
    1.413
    4th
    1.020
    Reverse
    3.145
    Differential Gear Ratio
    2.923
    Fluid Type
    Toyota Genuine ATF WS
    Fluid Capacity*2
    Liters (US qts, Imp. qts)
    8.1 (8.60, 7.10)
    Weight (Reference)*3
    kg (lb)
    89.2 (196.7)

    1. *1: Counter gear ratio included
    2. *2: Differential included
    3. *3: The weight shown is with the transaxle fully filled with fluid.

    C1
    No. 1 Clutch
    No. of Discs
    4
    C2
    No. 2 Clutch
    3
    C3
    No. 3 Clutch
    3
    B1
    No. 1 Brake
    3
    B2
    No. 2 Brake
    5
    B3
    No. 3 Brake
    3
    F1
    No. 1 One-way Clutch
    No. of Sprags
    22
    F2
    No. 2 One-way Clutch
    15
    Front Planetary Gear Unit
    No. of Sun Gear Teeth
    43
    No. of Pinion Gear Teeth
    17
    No. of Ring Gear Teeth
    77
    Rear Planetary Gear Unit
    No. of Sun Gear Teeth
    31
    No. of Pinion Gear Teeth
    19
    No. of Ring Gear Teeth
    69
    U/D Planetary Gear Unit
    No. of Sun Gear Teeth
    32
    No. of Pinion Gear Teeth
    26
    No. of Ring Gear Teeth
    83
    Counter Gear
    No. of Drive Gear Teeth
    50
    No. of Driven Gear Teeth
    51

  2. Torque Converter Assembly

    Torque Converter Assembly Type
    3-element, 1-step, 2-phase
    Stall Torque Ratio
    1.80