ENGINE UNIT > GENERAL



OUTLINE


  1. The 2GR-FE engine is a 3.5 liter, 24 valve DOHC V6 engine. This engine uses the Dual Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.


    W104651


MAJOR DIFFERENCE
  1. The new models have been modified from the previous models as shown below:

    1. The max output of the 2GR-FE engine on TMMR production has been changed (except models for Kazakhstan).


SPECIFICATION
  1. The specifications of the 2GR-FE engine are shown in the following table.

    Engine Type
    2GR-FE
    No. of Cyls. & Arrangement
    6-cylinder, V Type
    Valve Mechanism
    24-valve DOHC, Chain Drive
    (With Dual VVT-i)
    Combustion Chamber
    Pentroof Type
    Flow of Intake and Exhaust Gasses
    Cross-flow
    Fuel System
    SFI
    Ignition System
    DIS
    Displacement
    cm3 (cu. in.)
    3456 (210.9)
    Bore X Stroke
    mm (in.)
    94.0 X 83.0 (3.70 X 3.27)
    Compression Ratio
    10.8 : 1
    Max. Output (EEC)
    kW@rpm
    204@6200*1
    184@6200*2
    Max. Torque (EEC)
    N*m@rpm
    346@4700
    Oil Capacity
    Dry
    liters (US qts, Imp. qts)
    6.8 (7.2, 6.0)
    With Oil Filter
    liters (US qts, Imp. qts)
    6.1 (6.4, 5.4)
    Without Oil Filter
    liters (US qts, Imp. qts)
    5.7 (6.0, 5.0)
    Oil Grade
    API grade SL "Energy-Conserving", SM "Energy-Conserving" , SN "Resource-Conserving" or ILSAC multi grade engine oil
    Engine Coolant
    Type
    TOYOTA Genuine Super Long Life Coolant or the following*3
    Capacity
    liters (US qts, Imp. qts)
    8.9 (9.4, 7.8)*5
    8.8 (9.3, 7.7)*6
    Spark Plug
    Type
    DENSO Made
    FK20HR11 (Iridium)
    Plug Gap
    mm (in.)
    1.0 to 1.1 (0.0394 to 0.0433)
    Firing Order
    1 - 2 - 3 - 4 - 5 - 6
    Fuel Octane Number
    95 or higher
    Emission Regulation
    EURO IV
    Engine Service Mass*4 (Reference)
    kg (lb)
    163 (359)

    1. *1: TMMR production models for Kazakhstan and TMC production models
    2. *2: TMMR production models except for Kazakhstan
    3. *3: Similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology (Coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids).
    4. *4: The figure shown is the weight of the part without coolant and oil.
    5. *5: Except models for Russia
    6. *6: Models for Russia


W100676E05


Text in illustration 
*a
TMMR production models for Kazakhstan and TMC production models
-
-

W111046E01


Text in illustration 
*a
TMMR production models except for Kazakhstan
-
-

MAIN FEATURES
  1. The 2GR-FE engine has achieved the following performance through the use of the items listed in the table below.

    1. High performance and reliability

    2. Low noise and vibration

    3. Lightweight and compact design

    4. Good serviceability

    5. Clean emissions and fuel economy


Item
(1)
(2)
(3)
(4)
(5)
Engine Proper
A steel laminate type cylinder head gasket is used.
○
-
-
-
-
A taper squish shape is used for combustion chamber.
○
-
-
-
○
A cylinder block sub-assembly made of aluminum alloy is used.
-
-
○
-
-
The skirt portion of each piston has a resin coating applied to reduce friction.
○
○
-
-
○
An oil pan sub-assembly made of aluminum alloy is used.
-
○
○
-
-
Valve Mechanism
The Dual Variable Valve Timing-intelligent (VVT-i) system is used.
○
-
-
-
○
Valve lash adjuster assemblies are used.
○
○
-
○
-
A chain sub-assembly, No. 1 chain tensioner assembly (primary), and No. 2 chain tensioner assembly (secondary) are used.
-
○
○
○
-
No. 1 valve rocker arm sub-assemblies are used.
○
-
-
-
○
Lubrication System
An oil filter with a replaceable element is used.
-
-
-
○
-
Cooling System
TOYOTA Genuine Super Long Life Coolant (SLLC) is used.
-
-
-
○
-
Intake and Exhaust Systems
A linkless type throttle body is used.
-
-
○
○
-
An intake air surge tank made of plastic is used.
-
-
○
-
-
Stainless steel exhaust manifold sub-assemblies (RH and LH) are used.
-
-
○
-
○
An ultra thin-wall, high-cell density ceramic type Three-Way Catalytic converter (TWC) is used.
-
-
-
-
○
Fuel System
A fuel delivery pipe sub-assembly made of plastic is used.
-
-
○
-
-
A fuel returnless system is used.
-
-
○
○
○
Compact 12-hole type fuel injector assemblies are used.
○
-
-
-
○
A sheet steel fuel tank assembly is used.
-
-
○
-
○
Quick connectors are used to connect the fuel hose with the fuel pipe.
-
-
-
○
-
Ignition System
The Direct Ignition System (DIS) is used.
○
-
-
○
○
Long-reach type iridium-tipped spark plugs are used.
○
-
-
○
○
Charging System
A segment conductor type generator assembly is used.
○
-
○
-
-
A generator clutch pulley with a one-way clutch is used.
○
-
-
-
○
Starting System
A planetary reduction-segment conductor motor type starter assembly is used.
-
-
○
-
-
Engine Mount
An active control engine mount is used.
-
○
-
-
-
Serpentine Belt Drive System
A serpentine belt drive system is used.
-
-
○
○
-
Engine Control System
Magnetic Resistance Element (MRE) type camshaft position sensors are used.
○
-
-
-
-
The Electronic Throttle Control System-intelligent (ETCS-i) is used.
○
-
-
-
○
An Acoustic Control Induction System (ACIS) is used.
○
-
-
-
-
An air intake control system is used.
○
○
-
-
-
The cranking hold function is used.
○
-
-
-
-
An evaporative emission control system is used.
-
-
-
-
○