SMART ENTRY AND START SYSTEM > GENERAL



OUTLINE
  1. The smart entry and start system has the following main functions, making it a very user-friendly system.

    Function
    Outline
    Start Function
    The start function is operated by simply pushing the engine switch while carrying the electrical key transmitter sub-assembly. When the engine switch is pushed, the certification ECU (smart key ECU assembly) turns the ACC relay, IG1 relays and IG2 relay on or off to switch the power source.*1
    1. The power source changes depending on depression of the brake pedal and the shift position.
    Engine Immobiliser
    The engine immobiliser function compares the ID code that is registered in the certification ECU (smart key ECU assembly)*2 or ID code box (immobiliser code ECU)*3 with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly.
    Steering Wheel Lock
    The steering wheel lock function is operated to lock and unlock the steering wheel by using a lock/unlock mechanism in the steering column assembly.
    Entry Function
    Entry Unlock:
    The doors unlock when a front outside door handle is gripped.
    1. The driver door outside door handle unlocks the driver door.
    2. The front passenger door outside door handle unlocks all doors.
    Entry Lock:
    All doors lock when the lock sensor on a front outside door handle is touched.
    Entry Function
    Luggage Compartment Door Open Function
    The luggage compartment door open function can be used to open the luggage compartment door manually by simply pushing the luggage compartment door open switch.
    Wireless Door Lock Control
    The wireless door lock control function is a convenient system for locking and unlocking all the doors and opening the luggage compartment door at a distance. The basic operation is the same as that in the wireless door lock control system.
    *1: In this chapter, the expression "power source" has been used in some locations to allow precise explanations. The power source condition is also expressed using conventional expressions such as "engine switch off", "engine switch on (ACC)" and "engine switch on (IG)".
    *2: Models with wireless door lock buzzer answer back function
    *3: Models without wireless door lock buzzer answer back function