NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM > GENERAL



OUTLINE
  1. The display is a wide 7.0-inch Liquid Crystal Display (LCD) with a pressure sensitive touch panel, offering improved ease of use.



  2. A Hard Disk Drive (HDD) is used for the navigation receiver assembly. The HDD is available separately, enhancing serviceability. For details, refer to the Repair Manual.


    Y111329E01

  3. A multiple display function is provided. Due to this function, a map screen and air conditioning operation screen, and an audio screen or vehicle information screen can be displayed on the single screen simultaneously.

  4. This navigation system supports the connected services that enable a Point of Interest (POI) searched on the internet to be set as a destination or registered as a memory point.

  5. The navigation system supports a function used for the export/import of memory points. This function enables memory point data stored on the navigation receiver assembly to be transferred to another navigation system (such as another navigation receiver assembly) via a USB memory device.


SPECIFICATION

Multi-display
7.0-inch wide LCD
Navigation Computer
Fujitsu Ten
Hard Disk Drive
Aisin AW
Gyro Sensor
Piezoelectric Ceramic Element
Map Data Media
HDD (Capacity 80 GB)
Language Supported
Voice Guidance
English, German, French, Italian, Spanish, Dutch, Norwegian, Swedish, Portuguese, Danish, Finnish, Polish, Greek, Russian, Check, Romanian, Hungarian, Slovak, Turkish and Ukrainian
Voice Recognition
English, German, French, Italian, Spanish, Dutch and Russian

MAIN FEATURES


  1. Connected Services

    1. The following services are available by connecting the navigation system to Toyota's portal site via the internet using a cellular phone.

    2. To use these connected services, Bluetooth setting and a Portal account are required.



    3. To get a Portal account, access the Toyota Portal site (URL:www.my.toyota.eu).

      Contents
      Outline
      Online search
      New establishments, such as restaurants and bars, that are not registered in the navigation system can be set as a destination.
      Importing memory points
      Downloading via a cellular phone
      Establishments that were searched for using a personal computer can be set as a destination and can be registered as memory points.
      Downloading from a USB memory


      Y111331E01



  2. Export/Import Memory Point Function



    1. Memory point data stored in the navigation receiver assembly can be transferred to another navigation with AV system, enabling information sharing.


      Y113079E01

  3. The main functions of the multi-display are listed below.

    Function
    Outline
    Navigation System
    Through the use of the Global Positioning System (GPS) and map data which is stored on HDD, the navigation system analyzes the position of the vehicle and indicates the position on the map that is displayed on the screen. In addition, it is possible to use the system to register memory points and navigate to a destination.
    Audio/Video System
    Serves as the display and controls for the following:
    1. Radio operation
    2. CD player operation
    3. Bluetooth-compatible portable player operation
    4. USB memory operation (USB type)
    5. iPod operation
    6. Portable audio player operation (AUX type)
    Hands-free System
    When a Bluetooth-compatible cellular telephone is registered to the multi-display, the driver can make and receive calls or talk hands-free on the cellular telephone by operating the switches on the screen/steering pad.
    Speech Command System
    Operates the navigation, audio, and hands-free systems based on voice commands.
    Parking Assist Monitor System
    Displays a view of the area behind the vehicle that is captured by the television camera mounted on the luggage compartment door when the shift lever is moved to R.
    Others
    Maintenance Information
    Can be used to inform the driver of the inspection or replacement timing for the following items based on the Global Positioning System (GPS) information and distance driven.
    1. Engine oil: Replace engine oil
    2. Oil filter: Replace engine oil filter
    3. Rotation: Rotate tires
    4. Tires: Replace tires
    5. Battery: Replace battery
    6. Brake pad: Replace brake pads
    7. Wipers: Replace wiper blades
    8. Coolant: Replace engine coolant
    9. Brake oil: Replace brake fluid
    10. Trans. fluid: Replace ATF
    11. Service: Scheduled maintenance
    12. Air filter: Replace air filter
    13. Personal: New information items can be created separately from the provided items
    Language Select
    The language of the on-screen buttons, pop-up messages and the voice guidance can be changed.
    1. English, German, French Italian, Spanish, Dutch, Norwegian, Swedish, Portuguese, Danish, Finnish, Polish, Greek, Russian, Check, Romanian, Hungarian, Slovak, Turkish and Ukrainian
    Screen Setting
    1. This enables automatic return to the navigation screen from the audio screen.
    2. The color of the touch-screen buttons can be selected.
    Beep Setting
    The beep sound can be turned off.
    Keyboard Layout
    The keyboard layout can be changed.
    Delete Personal Data
    The following personal data can be deleted or returned to their default settings:
    1. Maintenance conditions
    2. Maintenance information "off" setting
    3. Memory point
    4. Password settings for backing up and copying memory points
    5. Areas to avoid
    6. Previous points
    7. Route guidance
    8. Route trace
    9. Phonebook data
    10. Call history data
    11. Speed dial data
    12. Bluetooth phone data
    13. Phone sound settings
    14. Phone display settings
    15. Message settings
    16. Audio setting
    17. Bluetooth audio setting
    18. Search engine settings
    Screen Adjustment
    The brightness or contrast of the screen can be adjusted to suit the brightness of the surroundings.
    Diagnosis
    This menu contains the following items:
    1. Failure Diagnosis
      1. System Check
      2. HDD Check
      3. Diagnosis Recorder
    1. Function Check / Setting
      1. Panel & steering Switch
      2. Touch Switch
      3. Mic & Voice Recognition
      4. Color Bar
      5. GPS & Vehicle Sensors
      6. Vehicle Signal
      7. HF Voice Quality Setting
      8. Camera Setting
    1. Service Information
      1. Program Update
      2. Version Information
      3. Memory point backup


PRECAUTION
  1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Expression
    Ignition Switch
    (Position)
    Engine Switch
    (Condition)
    Ignition Switch off
    LOCK
    Off
    Ignition Switch ACC
    ACC
    On (ACC)
    Ignition Switch ON
    ON
    On (IG)
    Engine Start
    START
    Start