NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM > DETAILS



FUNCTION
  1. Navigation Screen

    1. The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:

      1. - Map data in the HDD
      2. - Global Positioning System (GPS) satellites
      3. - Built-in gyro sensor
      4. - Vehicle speed signal
      5. - Reverse signal
      6. - Parking Blake signal

    2. The functions of the navigation screen are listed below.

      Item
      Function
      Map Display
      Linear Touch Scroll
      Enables smooth scrolling by connecting the touch points on the screen.
      Map Color Change
      Depending on the position of the light control switch, the screen changes to day mode or night mode.
      Taillight-interlocked Map Color Change
      Changes the color of the map screen that is displayed when the taillights are turned on.
      North Up / Heading Up
      1. If North Up is selected, regardless of the direction of vehicle travel, north is always up.
      2. If Heading Up is selected, the direction of vehicle travel is always up.
      3D Display
      Displays a 3-dimensional (3D) view of the map.
      Multi-step Scale Display
      Changes the map scale in 14 steps.
      Direct Scale Change
      Directly selects and displays the map scale.
      Street Name Indication on Scrolled Map
      Displays the street name and city name even when the map screen is being scrolled.
      Stepless Scale Display
      Changes the scale of the map from the basic 14 steps to an even finer range of scales.
      Road Number Sign Board Display
      Displays the road number on the map.
      Point of Interest Display
      Displays selected types of points of interest as marks on the map.
      Home Screen Display
      Displays different modes on a screen that is split into 3 views.
      Compass Mode Screen
      Displays the direction of travel and detailed data of the present location.
      Route Guidance Demonstration
      Demonstrates the route guidance to the destination.
      Route Trace
      It is possible to store up to the last 124 miles (200 km) of a traveled route and retrace the route on the display.
      Destination Search
      Preset Destination Memory Search
      Sets a pre-registered point as a destination point while driving.
      Address Search
      A destination can be set in 2 ways:
      1. Information can be entered in the order of: street name, town and house number.
      2. Information can be entered in the order of: town, street name and house number.
      Hybrid Point of Interest Search
      Narrows the search by names of the point of interest, category and areas.
      Online Search
      Allows use of an internet search engine to set a destination using the most up to date information.
      Previous Destination Search
      Stores the coordinates, names, and date of up to 100 locations that have been set as destinations in the past.
      Address Book (Memory Point) Search
      Sets a destination from the registered Address Book (Memory Point).
      Intersection Search
      By specifying 2 streets, the point at which they intersect is set as the destination point.
      Motorway Entrance or Exit Search
      Searches for the destination by the name of the street that connects to a motorway entrance or exit.
      Map Search
      A destination can be set by scrolling the cursor on the map.
      Coordinate Search
      A destination can be input by entering its coordinates.
      Voice-recognition Search
      A destination can be set up by voice command input.
      Route Search
      Multiple Destination Setting
      Sets multiple destinations. It can also rearrange the sequence of the destinations.
      Multiple Route Search
      Searches for multiple routes.
      Search Condition Designation
      Searches for the quick 1, quick 2, and short routes.
      Detour Search
      Changes the route to detour around a section of the route.
      Regulated Road Consideration
      Performs searches which consider regulated roads.
      Avoidance Area
      Searches for a route that avoids a designated area.
      Avoid Traffic Search
      Automatically changes to another route to avoid heavy congestion.
      Guidance
      Voice Guidance
      Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
      Next Turn Guidance
      Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
      Motorway Mode Display
      Displays the distance to the next junction and exit, or POIs in the vicinity of the motorway exit.
      Motorway Shield Icon Display
      Motorway shield icons will be displayed on the 3D guidance screen.
      Intersection Zoom-in Display
      Zooms in the image when approaching an intersection.
      Turn List Display
      Displays a turn list on the right side of the 2-screen display.
      Arrow (Turn-by-Turn) Display
      Displays the direction of the next turn and the distance to the turn on the right side of the 2-screen display.
      Distance-to-destination Display
      Displays the distance from the present location to the destination.
      Estimated Arrival Time Display
      Displays estimated arrival time.
      Others
      Voice Recognition
      Recognizes pre-programmed system commands spoken to operate the navigation system.



  2. Information Screen



    1. Information about fuel consumption per minute or per trip can be displayed.


      Y111328E01


      Item
      Outline
      (1)
      Clear Switch
      Clears all past information.
      (2)
      Average Speed
      Displays the value that has been calculated by the combination meter assembly, which is based on the distance driven and time elapsed since the ignition switch is turned to ON.
      (3)
      Elapsed Time
      Displays the value that has been calculated by the combination meter assembly, which is based on the time elapsed since the ignition switch is turned to ON.
      (4)
      Cruising Range
      Displays the approximate drivable distance.
      (5)
      Past Record Switch
      Changes to the Past Record (per trip) fuel consumption screen.
      (6)
      Average Per Minute Fuel Consumption
      1. Displays the value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), provided that the ignition switch is ON.
      2. Displays the average fuel consumption for the last minute, or since clear was last selected.
      (7)
      Current Per Minute Fuel Consumption
      Displays the instantaneous (Current) fuel consumption value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), provided that the ignition switch is ON.
      (8)
      Best Fuel Consumption
      Displays the best (most economical) per trip fuel consumption.
      (9)
      Update Switch
      1. Restarts calculation of the average fuel consumption value.
      2. Sends the average fuel consumption reset signal to the combination meter assembly to update the graph.
      (10)
      Average Fuel Consumption
      Displays the average fuel consumption for this trip and the previous 5 trips.
      (11)
      Trip Information Switch
      Changes to the average per minute fuel consumption screen.
      (12)
      Average Per Trip Fuel Consumption
      1. Displays the current record and the last 5 average per trip fuel consumption records or the current record and those since clear was last selected.
      2. Starts calculating the average fuel consumption when the average fuel consumption displayed on the combination meter assembly is reset.

  3. Setup Screen

    1. The settings for the functions of the multi-display are available from the setup screen.

      Item
      Function
      Display Settings
      1. Map Menu and Camera screen adjustment
      2. Depending on the position of the headlight switch, the screen changes to day or night mode.
      General Settings
      1. Time zones and the on/off setting of daylight saving time can be changed.
      2. The language can be selected.
      3. The voice recognition language can be selected.
      4. The home screen display can be changed.
      5. The beep sound can be turned off.
      6. Automatic return from the audio screen to the map screen after audio operation can be changed.
      7. The color of the screen buttons can be changed.
      8. Distance unit can be changed.
      9. Registered information (personal data) can be cleared.
      10. Navigation system program can be updated.
      Voice Settings
      1. The voice guidance volume can be adjusted or switched off.
      2. Voice recognition talkback can be set.
      3. Voice guidance while using the audio system can be set.
      4. Voice guidance during route guidance can be set.
      Navigation Settings
      The Navigation Settings can be used to:
      1. Set detailed online search settings such as:
        1. Synchronized settings of the online search portal site and navigation system
        2. Pop-up message display during online search
        3. Automatic accumulated data downloading settings from the portal site
        4. Roaming pop-up message settings
        5. Memorization settings of the user name and password used when connecting to the portal site
        6. Search engine settings of the online search
        7. Deletion of the online search history
        8. Change of the user name and password used when connecting to the portal site
        9. Deletion of the user name and password used when connecting to the portal site
      2. Set detailed navigation settings such as average cruising speed
      3. Set detailed navigation settings such as displayed POI icon categories
      4. Set detailed navigation settings such as display of 3D landmarks
      5. Displaying the speed limit of the road currently being used can be set
      6. The function that magnifies the map scale as the vehicle approaches a guidance point can be set
      7. Set the cautionary message display shown when a regulated street is included in the route
      8. Set the display of pop-up information
      9. Manual adjustment of the current vehicle position mark
      Vehicle Settings
      1. Settings can be changed for the following maintenance items:
        1. Reminder
        2. Engine oil
        3. Oil filter
        4. Rotation
        5. Tires
        6. Battery
        7. Brake pad
        8. Wipers
        9. Coolant
        10. Brake oil
        11. Trans. fluid
        12. Service
        13. Air filter
        14. Personal
        15. Set dealer
      2. Customizable vehicle settings can be changed.
      Phone Settings
      1. Phone sound settings can be changed:
        1. Call Volume
        2. Ring Tone Volume
        3. Ring Tone
      2. Phonebook settings can be changed:
        1. Manage Contacts
        2. Manage Speed Dials
        3. Delete Call History
      3. Message function settings can be changed:
        1. Message forwarding from cellular phones
        2. New message notification display
        3. New message voice notification
        4. Adjust the new message notification volume
        5. Select a new message voice notification tone
        6. Automatic message read out
        7. Adjust the message read out volume
        8. Cellular phone's read and unread status update
        9. Edit "Quick Reply messages"
      4. Phone display settings can be changed:
        1. Change the incoming call display
        2. Display of the automatic phonebook transfer completion message (For PBAP compatible models)
        3. Display of the automatic call history transfer completion message (For PBAP compatible models)
        4. Display of images during calls (For PBAP compatible models)
        5. Orientation of images displayed during calls (For PBAP compatible models)
      Bluetooth Settings
      1. Bluetooth device registration settings can be changed:
        1. Register a Bluetooth device
        2. Delete the Bluetooth device
        3. Edit the Bluetooth device
      2. Bluetooth devices can be selected
      3. Bluetooth device settings can be changed:
        1. Automatic connection to a Bluetooth device
        2. Changed to a desired Bluetooth device name
        3. Edited the Bluetooth device passcode
        4. Display Bluetooth device connection status
        5. Bluetooth DUN profile settings
      Audio Settings
      1. Sound quality can be adjusted.
      2. Radio setting can be changed:
        1. Automatically seek an FM station that regularly broadcasts traffic information and the station broadcasts
        2. An FM station providing good reception is automatically selected if current reception worsens.
        3. Switching over to a broadcasting station within the same local program network.
      3. Display cover art when a song stored in an iPod is being played.


DIAGNOSIS
  1. For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.