Home › Drivetrain ยท U241E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM

AUTOMATIC TRANSAXLE SYSTEM > FAIL-SAFE CHART

for Preparation Click here



FAIL-SAFE
This function minimizes the loss of the ECT functions when any malfunction occurs in a sensor or solenoid.
  1. ATF (Automatic Transmission Fluid) temperature sensor:
    When the ATF temperature sensor has a malfunction, 4th(O/D) upshift is prohibited.

  2. Counter gear speed sensor NC (Speed sensor NC):
    When the counter gear speed sensor has a malfunction, 4th(O/D) upshift is prohibited.

  3. Turbine speed sensor NT (Speed sensor NT):
    When the turbine speed sensor has a malfunction, 4th(O/D) upshift is prohibited.

  4. Shift solenoid valve DSL:
    When the solenoid valve DSL has a malfunction, the current to the solenoid valve is stopped.
    This stops lock-up control, then fuel economy decreases.

  5. Shift solenoid valve SL1, SL2 and S4:
    Fail safe function:
    If either of the shift solenoid valve circuits develops an open or short, the ECM turns the other shift solenoid "ON" and "OFF" in order to shift into the gear positions shown in the table below.
    Manual shifting as shown in the following table must be done (In case of a short circuit, the ECM stops sending the current to the short circuited solenoid).
    Even if starting the engine in the fail-safe mode, the gear position remains in the same position.

    HINT:
    1. *1: Actual gear shift (gear position) under fail-safe operation.
    2. OFF: OFF (the ECM stops sending current to a malfunctioning solenoid valve)
    3. →: Condition in the electrical malfunction is shown on the left of "→".
      Condition in the fail-safe mode is shown on the right of "→".


    Normal
    Solenoid Valve
    SL1
    ON
    OFF
    OFF
    OFF
    SL2
    ON
    ON
    OFF
    OFF
    S4
    OFF
    OFF
    OFF
    ON
    Gear Position
    1st
    2nd
    3rd
    4th (O/D)
    SL1 Malfunction
    Solenoid Valve
    SL1
    OFF
    SL2
    ON
    ON
    OFF → ON
    OFF → ON
    S4
    OFF
    OFF
    OFF → ON
    ON
    Gear Position *1
    2nd
    2nd
    3rd
    3rd
    SL2 Malfunction
    Solenoid Valve
    SL1
    ON → OFF
    OFF
    OFF
    OFF
    SL2
    OFF
    S4
    OFF
    OFF
    OFF
    ON
    Gear Position *1
    3rd
    3rd
    3rd
    4th (O/D)
    S4 Malfunction
    Solenoid Valve
    SL1
    ON
    OFF
    OFF
    OFF
    SL2
    ON
    ON
    OFF
    OFF
    SL4
    OFF
    Gear Position *1
    1st
    2nd
    3rd
    3rd
    SL1 and SL2 Malfunction
    Solenoid Valve
    SL1
    OFF
    SL2
    OFF
    S4
    OFF
    OFF
    OFF
    ON
    Gear Position *1
    3rd
    3rd
    3rd
    4th (O/D)
    SL1 and S4 Malfunction
    Solenoid Valve
    SL1
    OFF
    SL2
    ON
    ON
    OFF → ON
    OFF → ON
    S4
    OFF
    Gear Position *1
    2nd
    2nd
    2nd
    2nd
    SL2 and S4 Malfunction
    Solenoid Valve
    SL1
    ON → OFF
    OFF
    OFF
    OFF
    SL2
    OFF
    S4
    OFF
    Gear Position *1
    3rd
    3rd
    3rd
    3rd
    SL1, SL2 and S4 Malfunction
    Solenoid Valve
    SL1
    OFF
    SL2
    OFF
    S4
    OFF
    Gear Position *1
    3rd
    3rd
    3rd
    3rd