PARKING BRAKE SYSTEM > ADJUSTMENT |
| 1. INSPECT PARKING BRAKE PEDAL TRAVEL |
Fully depress the parking brake pedal to engage the parking brake.
Depress the pedal again to disengage the parking brake.
![]() |
Slowly depress the parking brake pedal using the specified force, and count the number of clicks.
| 2. ADJUST PARKING BRAKE PEDAL TRAVEL (for LHD) |
Completely release the parking brake pedal.
![]() |
Loosen the lock nut and the adjusting nut to completely release the parking brake cable.
| *1 | Lock Nut |
| *2 | Adjusting Nut |
Remove the rear wheels.
Temporarily install the hub nuts to the hub bolts.
Remove the parking brake shoe adjusting hole plug.
![]() |
Turn the shoe adjuster and expand the shoes until the disc locks.
![]() | Expand |
![]() | Contract |
Turn and contract the shoe adjuster until the disc can rotate smoothly.
Check that there is no brake drag against the shoes.
Install the parking brake shoe adjusting hole plug.
Turn the adjusting nut until the parking brake pedal travel is corrected to be within the specified range.
Using a wrench or an equivalent tool, hold the adjusting nut and tighten the lock nut.
Operate the parking brake pedal 3 to 4 times, and check the parking brake pedal travel.
Check that the parking brake does not drag.
Remove the hub nuts from the hub bolts.
Install the rear wheels.
| 3. ADJUST PARKING BRAKE PEDAL TRAVEL (for RHD) |
Completely release the parking brake pedal.
![]() |
Loosen the lock nut and the adjusting nut to completely release the parking brake cable.
| *1 | Lock Nut |
| *2 | Adjusting Nut |
Remove the rear wheels.
Temporarily install the hub nuts to the hub bolts.
Remove the parking brake shoes adjusting hole plug.
![]() |
Turn the shoe adjuster and expand the shoes until the disc locks.
![]() | Expand |
![]() | Contract |
Turn and contract the shoe adjuster until the disc can rotate smoothly.
Check that there is no brake drag against the shoes.
Install the parking brake shoe adjusting hole plug.
Turn the adjusting nut until the parking brake pedal travel is corrected to be within the specified range.
Using a wrench or an equivalent tool, hold the adjusting nut and tighten the lock nut.
Operate the parking brake pedal 3 to 4 times, and check the parking brake pedal travel.
Check that the parking brake does not drag.
Remove the hub nuts from the hub bolts.
Install the rear wheels.
| 4. INSPECT BRAKE WARNING LIGHT |
When operating the parking brake pedal, check that the brake warning light illuminates.