STEERING PAD > ON-VEHICLE INSPECTION |
| 1. INSPECT HORN BUTTON ASSEMBLY (for Vehicle not Involved in Collision) |
Perform a diagnostic system check.
for Separate Type Yaw Rate Sensor: (Click here)
for Built-in Type Yaw Rate Sensor: (Click here)
Visually check for defects with the horn button assembly installed on the vehicle.
| 2. INSPECT HORN BUTTON ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed) |
Perform a diagnostic system check.
for Separate Type Yaw Rate Sensor: (Click here)
for Built-in Type Yaw Rate Sensor: (Click here)
Visually check for defects with the horn button assembly removed from the vehicle.