Home
›
Engine / Hybrid System · 2GR-FE
›
ENGINE CONTROL
›
CRANKSHAFT POSITION SENSOR
CRANKSHAFT POSITION SENSOR > INSPECTION
for Preparation
Click here
1. INSPECT CRANK POSITION SENSOR
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Temperature
Specified Condition
Cold
1630 to 2740 Ω
Hot
2065 to 3225 Ω
HINT:
"Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122 °F) and "Hot" is from 50 to 100°C (122 to 212°F).
If the resistance is not as specified, replace the crank position sensor.