Home › Drivetrain ยท U241E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM

AUTOMATIC TRANSAXLE SYSTEM > TERMINALS OF ECM

for Preparation Click here



ECM

A194498E43

HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbols)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.


Terminals No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
E83-56 (D) - E83-104 (E1)
G - BR
D shift position switch signal
Ignition switch ON and shift lever D and S position
11 to 14 V
Ignition switch ON and shift lever except D and S position
Below 1 V
E83-53 (R) - E83-104 (E1)
B - BR
R shift position switch signal
Ignition switch ON and shift lever R position
11 to 14 V
Ignition switch ON and shift lever except R position
Below 1 V
A74-8 (SPD) - E83-104 (E1)
L - BR
Speed signal
Vehicle speed 20 km/h (12mph)
Pulse generation
(See waveform 7)
A74-36 (STP) - E83-104 (E1)
BE - BR
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
Brake pedal is released
Below 1.5 V
A74-51 (SFTD) - E83-104 (E1)
V - BR
Down shift switch signal
Ignition switch ON and shift lever S position
11 to 14 V
Ignition switch ON and shift lever "-" position (Down shift)
Below 1 V
A74-16 (SFTU) - E83-104 (E1)
R - BR
Up shift switch signal
Ignition switch ON and shift lever S position
11 to 14 V
Ignition switch ON and shift lever "+" position (Up shift)
Below 1 V
E83-74 (S) - E83-104 (E1)
P - BR
S shift position switch signal
Ignition switch ON and shift lever S, "+" and "-" position
11 to 14 V
Ignition switch ON and shift lever except S, "+" and "-" position
Below 1 V
E83-73 (P) - E83-104 (E1)
GR - BR
P shift position switch signal
Ignition switch ON and shift lever P position
11 to 14 V
Ignition switch ON and shift lever except P position
Below 1 V
E83-54 (N) - E83-104 (E1)
SB - BR
N shift position switch signal
Ignition switch ON and shift lever N position
11 to 14 V
Ignition switch ON and shift lever except N position
Below 1 V
E83-52 (NSW) - E83-104 (E1)
LG - BR
Park neutral switch signal
Ignition switch ON and shift lever P and N position
Below 2 V
Ignition switch ON and shift lever except P and N position
11 to 14 V
E83-79 (DSL) - E83-104 (E1)
B - BR
DSL solenoid signal
Vehicle speed 65 km/h (40mph), lock-up (ON to OFF)
Pulse generation
(See waveform 2)
E83-78 (S4) - E83-104 (E1)
GR - BR
S4 solenoid signal
Ignition switch ON
Below 1 V
4th gear
11 to 14 V
Except 4th gear
Below 1 V
E83-58 (SL2+) - E83-59 (SL2-)
G - R
SL2 solenoid signal
Engine idle speed
Pulse generation
(See waveform 3)
Ignition switch ON
Below 1 V
1st or 2nd gear
11 to 14 V
3rd or O/D gear
Below 1 V
E83-57 (SL1+) - E83-77 (SL1-)
L - LG
SL1 solenoid signal
Engine idle speed
Pulse generation
(See waveform 4)
Ignition switch ON
11 to 14 V
1st gear
11 to 14 V
Except 1st gear
Below 1 V
E83-101 (NC+) - E83-102 (NC-)
LG - P
Speed sensor (NC) signal
Vehicle speed 30 km/h (19mph): (3rd gear)
Engine speed 1400 rpm
Pulse generation
(See waveform 5)
E83-125 (NT+) - E83-124 (NT-)
G - W
Speed sensor (NT) signal
Vehicle speed 20 km/h (12mph)
Pulse generation
(See waveform 6)
E83-76 (SLT+) - E83-75 (SLT-)
P - W
SLT solenoid signal
Engine idle speed
Pulse generation
(See waveform 1)
E83-72 (THO1) - E83-95 (ETHO)
Y - V
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V


    G023426E05
  1. Waveform 1
    Reference: 
    Terminal
    SLT+ - SLT-
    Tool setting
    5 V/DIV., 1ms./DIV.
    Vehicle condition
    Engine idle speed



  2. C053420E07
  3. Waveform 2
    Reference: 
    Terminal
    DSL - E1
    Tool setting
    10 V/DIV., 100ms./DIV.
    Vehicle condition
    Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)



  4. G023426E05
  5. Waveform 3
    Reference: 
    Terminal
    SL2+ - SL2-
    Tool setting
    5 V/DIV., 1ms./DIV.
    Vehicle condition
    Engine idle speed



  6. G023426E05
  7. Waveform 4
    Reference: 
    Terminal
    SL1+ - SL1-
    Tool setting
    5 V/DIV., 1ms./DIV.
    Vehicle condition
    Engine idle speed



  8. C093866E08
  9. Waveform 5
    Reference: 
    Terminal
    NC+ - NC-
    Tool setting
    1 V/DIV., 1ms./DIV.
    Vehicle condition
    Vehicle speed 30 km/h (19 mph): (3rd gear)
    Engine speed 1400 rpm



  10. C053419E12
  11. Waveform 6
    Reference: 
    Terminal
    NT+ - NT-
    Tool setting
    5 V/DIV., 0.5ms./DIV.
    Vehicle condition
    Vehicle speed 20 km/h (12 mph)



  12. C053421E08
  13. Waveform 7
    Reference: 
    Terminal
    SPD - E1
    Tool setting
    5 V/DIV., 20ms./DIV.
    Vehicle condition
    Vehicle speed 20 km/h (12 mph)

    HINT:
    Depending on the vehicle, the output waveform voltage, influenced by optionally installed systems, may become 5V.