AUTOMATIC TRANSAXLE SYSTEM > MONITOR DRIVE PATTERN |
| TEST MONITOR DRIVE PATTERN FOR ECT |
Preparation for driving
Warm up the engine sufficiently (engine coolant temperature is 60°C (140°F) or higher).
Drive the vehicle when the atmospheric temperature is -10°C (14°F) or higher.
Some malfunctions are not detected when the atmospheric temperature is less than -10°C (14°F).
Drive pattern
Drive the vehicle through all the gears.
Stop → 1st → 2nd → 3rd → 4th → 5th → 6th → 6th (lock-up ON).
Confirm engine braking using the S position. While driving with S6 range selected and 6th gear operating with lock-up on, move the shift lever toward "-" to downshift from 6 to 5, 5 to 4, 4 to 3, 3 to 2, 2 to 1.
Repeat the above drive pattern three times or more.
