TILT AND TELESCOPIC MANUAL SWITCH > REMOVAL |
| 1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD |
| 2. REMOVE HORN BUTTON ASSEMBLY |
| 3. REMOVE STEERING WHEEL ASSEMBLY |
![]() |
Remove the steering wheel assembly set nut.
| *a | Matchmark |
Put matchmarks on the steering wheel assembly and steering main shaft.
Disconnect the connectors from the spiral cable.
![]() |
Using SST, remove the steering wheel assembly.
| *a | Turn |
| *b | Hold |
| 4. REMOVE LOWER STEERING COLUMN COVER |
![]() |
Remove the 3 screws.
![]() |
Push the right and left sides of the lower steering column cover, and disengage the 2 claws to remove the lower steering column cover.
| 5. REMOVE TILT AND TELESCOPIC SWITCH |
![]() |
Disconnect the connector.
Disengage the claw and pull out the tilt and telescopic switch.