Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Power Seat)

FRONT SEAT ASSEMBLY (for Power Seat) > INSPECTION

for Preparation Click here



1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY


    B161051E22
  1. Check the operation of the slide motor.

    1. Check if the front seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.
      Text in Illustration 
      *a
      Component without harness connected
      (Slide Motor (Separate Type Front Seat Cushion Spring Assembly))

      Standard:
      Measurement Condition
      Operational Direction
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Forward
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Backward

      If the result is not as specified, replace the separate type front seat cushion spring assembly.



    B161051E22
  1. Check the operation of the lifter motor. (for Driver)

    1. Check if the front seat cushion moves smoothly when the battery is connected to the lifter motor connector terminals.
      Text in Illustration 
      *a
      Component without harness connected
      (Lifter Motor (Separate Type Front Seat Cushion Spring Assembly))

      Standard:
      Measurement Condition
      Operational Direction
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Upward
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Downward

      If the result is not as specified, replace the separate type front seat cushion spring assembly.



    B161051E22
  1. Check the operation of the front vertical motor. (for Driver)

    1. Check if the front seat cushion moves smoothly when the battery is connected to the front vertical motor connector terminals.
      Text in Illustration 
      *a
      Component without harness connected
      (Front Vertical Motor (Separate Type Front Seat Cushion Spring Assembly))

      Standard:
      Measurement Condition
      Operational Direction
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Upward
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Downward

      If the result is not as specified, replace the separate type front seat cushion spring assembly.



2. INSPECT SEPARATE TYPE FRONT SEAT BACK SPRING ASSEMBLY


    B161051E22
  1. Check the operation of the reclining motor.

    1. Check if the front seat back moves smoothly when the battery is connected to the reclining motor connector terminals.
      Text in Illustration 
      *a
      Component without harness connected
      (Reclining Motor (Separate Type Front Seat Back Spring Assembly))

      Standard:
      Measurement Condition
      Operational Direction
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Forward
      Battery negative (+) → Terminal 2
      Battery positive (-) → Terminal 1
      Rearward

      If the result is not as specified, replace the separate type front seat back spring assembly.



    B161051E22
  1. Check the operation of the lumbar support adjuster assembly. (for Driver)

    1. Check that the front seat back moves smoothly when the battery is connected to the lumbar support adjuster assembly connector terminals.
      Text in Illustration 
      *a
      Component without harness connected
      (Lumbar Support Adjuster Assembly (Separate Type Front Seat Back Spring Assembly))

      Standard:
      Measurement Condition
      Operational Direction
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Seat back moves forward
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Seat back moves backward

      If the result is not as specified, replace the separate type front seat back spring assembly.