REAR SEAT INNER BELT ASSEMBLY > ON-VEHICLE INSPECTION |
| 1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for Vehicle not Involved in Collision) |
Perform a diagnostic system check (Click here). (for Built-in Type Yaw Rate Sensor)
Perform a diagnostic system check (Click here). (for Separate Type Yaw Rate Sensor)
Visually check for defects with the rear seat inner with center belt assembly LH installed on the vehicle.
The defects are as follows:
| 2. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for Vehicle Involved in Collision) |
Perform a diagnostic system check (Click here). (for Built-in Type Yaw Rate Sensor)
Perform a diagnostic system check (Click here). (for Separate Type Yaw Rate Sensor)
Visually check for defects with the rear seat inner with center belt assembly LH removed from the vehicle.
The defects are as follows: