Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1201    Engine Control System Malfunction

for Preparation Click here


DESCRIPTION

If a malfunction in the SFI system is detected, the operation of VSC and TRC is prohibited by the fail-safe function. When the signals from the engine are received normally, fail-safe control is canceled.

DTC No.
DTC Detection Condition
Trouble Area
C1201
Engine control system malfunction signal continues for 2.5 seconds.
SFI system

INSPECTION PROCEDURE

1.CHECK SFI SYSTEM
  1. Check if an SFI system DTC is output (Click here for 2GR-FE, Click here for 2AR-FE, or Click here for 1AZ-FE).

    Result:

    Result
    Proceed to
    DTC is not output.
    A
    DTC is output.
    B

    HINT:
    If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts (Click here).



B
INSPECT SFI SYSTEM
A

REPLACE ECM