Home › Engine / Hybrid System ยท 2GR-FE › COOLING › COOLING FAN SYSTEM

COOLING FAN SYSTEM > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COOLING FAN SYSTEM
  1. Connect the intelligent tester to the DLC3.

  1. Turn the engine switch on (IG).

  1. Turn the tester on.

  1. Enter the following menus: Powertrain / Engine / Active Test / Control the Electric Cooling Fan.

  1. Check the operation of the cooling fans while operating them using the tester.
    If the cooling fan motor does not operate, check the cooling fan circuit (Click here).