COOLING FAN SYSTEM > ON-VEHICLE INSPECTION |
| 1. INSPECT COOLING FAN OPERATION AT LOW TEMPERATURES (Below 96°C (205°F)) |
Turn the ignition switch to ON.
Check that the fans are stopped.
If not, check the fan relay and engine coolant temperature sensor, and check whether there is disconnection or an open circuit between them.
Disconnect the engine coolant temperature sensor connector.
Check that the fans operate.
If not, check the fuses, fan relay, ECM and fans, and check for a short circuit between the cooing fan relay and engine coolant temperature sensor.
Reconnect the engine coolant temperature sensor connector.
| 2. INSPECT COOLING FAN OPERATION AT HIGH TEMPERATURES (Above 98°C (208°F)) |
Start the engine, and raise the engine coolant temperature to above 98°C (208°F).
Check that the fans operate.
If not, replace the engine coolant temperature sensor.