Home › Steering › STEERING COLUMN › POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM > TERMINALS OF ECU

for Preparation Click here



MULTIPLEX TILT AND TELESCOPIC ECU

C240520E03


Text in Illustration 
*a
Component without harness connected
(Multiplex tilt and telescopic ECU)
-
-
  1. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    I15-1 (GND) - Body ground
    W-B - Body ground
    ECU ground
    Always
    Below 1 Ω
    I15-2 (+B) - I15-1 (GND)
    Y - W-B
    Motor power source
    Always
    11 to 14 V
    I15-3 (CANP) - I15-11 (CANN)
    BR - GR
    CAN communication
    Engine switch off
    54 to 69 Ω
    I15-4 (E1) - Body ground
    P - Body ground
    Tilt sensor ground
    Always
    Below 1 Ω
    I15-5 (VC) - I15-18 (MSW)
    LG - W
    Tilt and telescopic switch signal
    Engine switch on (IG)
    4.9 to 5.1 V
    I15-6 (TEM+) - I15-1 (GND)
    R - W-B
    Telescopic motor output
    1. Engine switch on (IG)
    2. Steering column contracting
    11 to 14 V
    Telescopic motor not operating
    Below 1 V
    I15-7 (TIM+) - I15-1 (GND)
    B - W-B
    Tilt motor output
    1. Engine switch on (IG)
    2. Steering wheel tilting up
    11 to 14 V
    Tilt motor not operating
    Below 1 V
    I15-8 (GND2) - Body ground
    BR - Body ground
    ECU ground
    Always
    Below 1 Ω
    I15-9 (ECUB) - I15-1 (GND)
    W - W-B
    ECU power source
    Always
    11 to 14 V
    I15-10 (IG) - I15-1 (GND)
    Y - W-B
    IG signal / IG power source
    Engine switch on (IG)
    11 to 14 V
    Engine switch off
    Below 1 V
    I15-13 (VCI) - I15-4 (E1)
    L - P
    Tilt sensor power source
    Engine switch on (IG)
    8 to 16 V
    I15-14 (VCE) - I15-17 (E2)
    SB - B
    Telescopic sensor power source
    Engine switch on (IG)
    8 to 16 V
    I15-15 (TES) - I15-17 (E2)
    G - B
    Telescopic sensor signal
    Telescopic motor operating
    Pulse generation
    HI: 8 to 16 V
    LOW: Below 1 V
    I15-16 (TIS) - I15-4 (E1)
    R - P
    Tilt sensor signal
    Tilt motor operating
    Pulse generation
    HI: 8 to 16 V
    LOW: Below 1 V
    I15-17 (E2) - Body ground
    B - Body ground
    Telescopic sensor ground
    Always
    Below 1 Ω
    I15-19 (TEM-) - I15-1 (GND)
    L - W-B
    Telescopic motor output
    1. Engine switch on (IG)
    2. Steering column extending
    11 to 14 V
    Telescopic motor not operating
    Below 1 Ω
    I15-20 (TIM-) - I15-1 (GND)
    G - W-B
    Tilt motor output
    1. Engine switch on (IG)
    2. Steering wheel tilting down
    11 to 14 V
    Tilt motor not operating
    Below 1 Ω