Home › Engine / Hybrid System ยท 1AZ-FE › COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK COOLING FAN MOTOR


    A255570E01
  1. Check that the cooling fan motor operates smoothly when the battery is connected to the cooling fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (Cooling Fan Motor)

  1. Measure the current while the cooling fan motor is operating.

    Standard Current:
    Item
    Condition
    Specified Condition
    Cooling fan motor
    Battery voltage applied at 20°C (68°F)
    5.5 to 7.5 A

    If the result is not as specified, replace the cooling fan motor.



2. CHECK NO. 2 COOLING FAN MOTOR


    A255569E01
  1. Check that the No. 2 cooling fan motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 2 cooling Fan Motor)

  1. Measure the current while the No. 2 cooling fan motor is operating.

    Standard Current:
    Item
    Condition
    Specified Condition
    No. 2 cooling fan motor
    Battery voltage applied at 20°C (68°F)
    5.5 to 7.5 A

    If the result is not as specified, replace the No. 2 cooling fan motor.