FRONT SEAT ASSEMBLY (for Power Seat) > REMOVAL |
| 1. PRECAUTION |
| 2. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 3. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER |
Operate the slide and vertical power seat switch knob and move the seat to the rearmost position.
![]() |
Disengage the 2 claws to remove the front outer seat track bracket cover.
| 4. REMOVE FRONT INNER SEAT TRACK BRACKET COVER |
![]() |
Disengage the 2 claws to remove the front inner seat track bracket cover.
| 5. REMOVE REAR OUTER SEAT TRACK BRACKET COVER |
Operate the slide and vertical power seat switch knob and move the seat to the foremost position.
![]() |
Disengage the 2 claws to remove the rear outer seat track bracket cover.
| 6. REMOVE REAR INNER SEAT TRACK BRACKET COVER |
![]() |
Disengage the 2 claws to remove the rear inner seat track bracket cover.
| 7. REMOVE FRONT SEAT ASSEMBLY |
![]() |
Remove the 2 bolts on the rear side of the seat.
Operate the slide and vertical power seat switch knob and move the seat to the rearmost position.
Remove the 2 bolts on the front side of the seat.
Operate the slide and vertical power seat switch knob and move the seat to the center position. Then, operate the reclining power seat switch knob and move the seatback to the upright position.
Disconnect the cable from the negative (-) battery terminal.
Disconnect each connector and clamp under the seat.
Remove the front seat assembly.