DTC B2624 Vehicles Speed Malfunction |
| DTC No. | Detection Item | Trouble Area |
| B2624 |
|
|
| 1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM) |
Check for DTCs (Click here).
|
| ||||
| OK | |
| 2.READ VALUE USING INTELLIGENT TESTER (FREEZE SPEED INFO) |
Turn the engine switch off.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Check the vehicle speed signal on the intelligent tester. Enter the following menus: Body / Tilt & Telescopic / Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Freeze Speed Info | Vehicle speed data/ Min.: 0 km/h (0 mph) Max.: 255 km/h (158 mph) | Stop → Drive → Stop | 0 km/h (0 mph) → Same speed as indicated on speedometer → 0 km/h (0 mph) |
| Result | Proceed to |
| Intelligent tester indication is normal. | A |
| Intelligent tester indication is abnormal. | B |
|
| ||||
| A | ||
| ||