FRONT LOWER SUSPENSION ARM (for 2GR-FE) > REMOVAL |
| 1. REMOVE FRONT FRAME ASSEMBLY |
| 2. REMOVE ENGINE MOUNTING INSULATOR |
![]() |
Remove the 2 hole plugs from the front frame assembly.
Remove the 3 nuts and engine mounting insulator LH.
| 3. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY |
![]() |
Remove the 3 bolts, nut and front lower No. 1 suspension arm sub-assembly from the front frame assembly.
Remove the front lower arm bushing stopper from the front lower No. 1 suspension arm sub-assembly.