Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR

FRONT STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
for 2AR-FE: (Click here)
for 2GR-FE: (Click here)


2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    C239297
  1. Remove the nut and front stabilizer link assembly LH from the front stabilizer bar.
    If the ball joint turns together with the nut, use a hexagon wrench to hold the stud bolt.



3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Perform the same procedure as the LH side.



4. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    C238973
  1. Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.



5. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT:
Perform the same procedure as the LH side.



6. REMOVE FRONT STABILIZER BAR
  1. Remove the front stabilizer bar from the front frame assembly.



7. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING
  1. Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.