REAR LOWER ARM > REMOVAL |
| 1. REMOVE REAR WHEELS |
| 2. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY (w/ Height Control Sensor) |
| 3. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH |
![]() |
Remove the bolt and nut, and separate the rear No. 2 suspension arm assembly RH (outer side) from the rear axle carrier sub-assembly.
| 4. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH |
![]() |
Remove the bolt and rear No. 2 suspension arm assembly RH from the rear suspension member sub-assembly.
| 5. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY |
| 6. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH |
![]() |
Remove the bolt and rear No. 2 suspension arm assembly LH from the rear suspension member sub-assembly.
| 7. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY LH |
![]() |
Remove the bolt and rear No. 1 suspension arm assembly from the rear suspension member sub-assembly.
| 8. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY RH |