REAR STABILIZER BAR > INSTALLATION |
| 1. INSTALL REAR STABILIZER BUSHING |
![]() |
Install the 2 rear stabilizer bushings to the outside of the stopper ring on the rear stabilizer bar as shown in the illustration.
| *a | Stopper Ring |
| *b | Cutout |
![]() | Rear of the Vehicle |
![]() | Outside of the Vehicle |
| 2. INSTALL REAR NO. 1 STABILIZER BAR BRACKET |
Install the 2 rear No. 1 stabilizer bar brackets.
| 3. INSTALL REAR STABILIZER BAR |
![]() |
Install the rear stabilizer bar with the 4 bolts.
![]() | Bolt |
![]() | Front of the Vehicle |
| 4. INSTALL REAR STABILIZER LINK ASSEMBLY LH |
Install the rear stabilizer link assembly LH to the rear shock absorber assembly with the nut.
Install the rear stabilizer link assembly LH to the rear stabilizer bar with the nut.
| 5. INSTALL REAR STABILIZER LINK ASSEMBLY RH |
| 6. INSTALL NO. 2 FLOOR UNDER COVER |
Install the No. 2 floor under cover with the 6 nuts.
Install the 2 clips.
| 7. INSTALL NO. 1 FLOOR UNDER COVER |
Install the No. 1 floor under cover with the 5 nuts and 2 clips.
| 8. INSTALL REAR WHEELS |