Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > TERMINALS OF ECU

for Preparation Click here



COMBINATION METER ASSEMBLY

E224288E04

  1. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    I18-1 (B) - Body ground
    W - Body ground
    Battery
    Always
    11 to 14 V
    I18-7 (ES) - Body Ground
    BR - Body ground
    Ground
    Always
    Below 1 Ω
    I18-8 (SI) - Body ground
    P - Body ground
    Speed signal for other system (Input)
    Ignition switch ON, wheel turns slowly.
    Pulse generation
    (See waveform 1)
    I18-9 (+S) - Body ground
    V - Body ground
    Speed signal for other system (Output)
    Ignition switch ON, turn the wheel slowly.
    Pulse generation
    (See waveform 1)
    I18-11 (S) - Body ground
    B - Body ground
    Oil pressure signal
    Ignition switch ON, oil pressure warning light off
    9 to 15 V
    Ignition switch ON, oil pressure warning light on
    Below 1 V
    I18-12 (LVWG)*1 - Body ground
    P - Body ground
    Headlight leveling signal
    Ignition switch ON, leveling indicator light off
    11 to 14 V
    Ignition switch ON, leveling indicator light on
    Below 1 V
    I18-13 (IG+) - Body ground
    L - Body ground
    Ignition switch signal
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    I18-15 (CANL) - Body ground
    W - Body ground
    CAN communication line
    -
    -
    I18-16 (CANH) - Body ground
    R - Body ground
    CAN communication line
    -
    -
    I18-17 (FE) - I18-18 (FR)
    V - GR
    Fuel signal
    Ignition switch ON, fuel level not low
    4 to 14 V
    Ignition switch ON, fuel level low
    4 V or less
    I18-19 (SW) - Body ground
    B - Body ground
    Brake fluid level signal
    Ignition switch ON, brake warning light off
    11 to 14 V
    Ignition switch ON, brake warning light on
    Below 1 V
    I18-21 (CHG-) - Body ground
    SB - Body ground
    Charge warning light signal
    Ignition switch ON, charge warning light off
    11 to 14 V
    Ignition switch ON, charge warning light on
    Below 1 V
    I18-22 (CHK) - Body ground
    R - Body ground
    MIL (Check engine warning light) signal
    Ignition switch ON, MIL off
    11 to 14 V
    Ignition switch ON, MIL on
    Below 1 V
    I18-23 (MSSL)*2 - Body ground
    L - Body ground
    Steering pad switch assembly (DISP switch) signal
    Ignition switch ON, DISP switch not pressed
    4 to 5 V
    Ignition switch ON, DISP switch pressed
    Below 1 V
    I17-1 (B) - Body ground
    R - Body ground
    Battery
    Always
    11 to 14 V
    I17-3 (ER) - Body ground
    P - Body ground
    Turn RH switch signal
    Ignition switch ON, turn RH switch off
    11 to 14 V
    Ignition switch ON, turn RH switch on
    Below 1 V
    I17-4 (EL) - Body ground
    L - Body ground
    Turn LH switch signal
    Ignition switch ON, turn LH switch off
    11 to 14 V
    Ignition switch ON, turn LH switch on
    Below 1 V
    I17-5 (HAZ) - Body ground
    W - Body ground
    Hazard warning switch signal
    Ignition switch ON, hazard warning switch off
    11 to 14 V
    Ignition switch ON, hazard warning switch on
    Below 1 V
    I17-7 (LL) - Body ground
    R - Body ground
    Turn LH indicator light signal
    Turn LH indicator light off
    11 to 14 V
    Turn LH indicator light blinks
    11 to 14 V ←→ Below 1 V
    I17-13 (LR) - Body ground
    G - Body ground
    Turn RH indicator light signal
    Turn RH indicator light off
    11 to 14 V
    Turn RH indicator light blinks
    11 to 14 V ←→ Below 1 V

    1. *1: w/ Automatic Headlight Beam Level Control System
    2. *2: w/ Steering Pad Switch



  2. I043789E03
  3. Waveform 1 (Reference):
    Item
    Condition
    Tool setting
    5 V/DIV., 20 ms./DIV.
    Vehicle condition
    Wheel being rotated

    HINT:
    When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.


CLOCK ASSEMBLY

E224293E02

  1. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    I59-7 (E) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    I59-3 (ILL+) - Body ground
    V - Body ground
    Illumination signal
    Light control switch off
    Below 1 V
    Light control switch TAIL or HEAD
    11 to 14 V
    I59-2 (ACC) - Body ground
    P - Body ground
    Ignition switch signal
    Ignition switch off
    Below 1 V
    Ignition switch ACC
    11 to 14 V
    I59-1 (B) - Body ground
    LG - Body ground
    Battery
    Always
    11 to 14 V


COMBINATION METER ASSEMBLY INNER CIRCUIT

E224283E01


E224316E01


E224317E01