Home › Vehicle Exterior › HORN › HORN

HORN > INSPECTION

for Preparation Click here



1. INSPECT HIGH PITCHED HORN ASSEMBLY


    E226259E01
  1. Apply battery voltage and check the operation of the horn according to the table below.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal A4-1
    Battery negative (-) → Body ground
    Horn sounds

    Text in Illustration 
    *a
    Component without harness connected
    (High Pitched Horn Assembly)
    If the result is not as specified, replace the high pitched horn assembly.



2. INSPECT LOW PITCHED HORN ASSEMBLY


    E226259E02
  1. Apply battery voltage and check the operation of the horn according to the table below.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal A1-1
    Battery negative (-) → Body ground
    Horn sounds

    Text in Illustration 
    *a
    Component without harness connected
    (Low Pitched Horn Assembly)
    If the result is not as specified, replace the low pitched horn assembly.