Home
›
Engine / Hybrid System ยท 2GR-FE
›
ENGINE CONTROL
›
MASS AIR FLOW METER
MASS AIR FLOW METER > INSTALLATION
for Preparation
Click here
HINT:
Perform "Inspection After Repairs" after replacing the mass air flow meter sub-assembly (
Click here
).
1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY
Install the mass air flow meter with the 2 screws.
NOTICE:
Make sure that the O-ring is not cracked or does not jump out of position during installation.
HINT:
Perform "Inspection After Repairs" after replacing the mass air flow meter sub-assembly (
Click here
).
Connect the mass air flow meter connector.