Home › Engine / Hybrid System ยท 2GR-FE › ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE

CAMSHAFT OIL CONTROL VALVE > INSTALLATION

for Preparation Click here



1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    A090053E06
  1. Apply a light coat of engine oil to 4 new O-rings and install them to the 4 camshaft timing oil control valve assemblies.
    Text in Illustration 
    *1
    New O-ring

  1. Install the 4 oil control valves with the 4 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

    NOTICE:
    Make sure that each O-ring is not cracked or does not jump out of position during installation.

  1. Connect the 4 oil control valve connectors.



2. CONNECT ENGINE WIRE
  1. Install the 2 wire harness brackets with the 2 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the 3 wire harness clamps.



3. INSTALL INTAKE AIR SURGE TANK ASSEMBLY
(Click here).