CAMSHAFT OIL CONTROL VALVE > REMOVAL |
| 1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY |
| 2. DISCONNECT ENGINE WIRE |
![]() |
Disconnect the 3 wire harness clamps.
| *a | for Bank 2 |
| *b | for Bank 1 |
Remove the 2 bolts and 2 wire harness brackets.
| 3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
Disconnect the 4 oil control valve connectors.
![]() |
Remove the 4 bolts and 4 oil control valves.
| *a | for Intake Side |
| *b | for Exhaust Side |
| *c | for Bank 2 |
| *d | for Bank 1 |
![]() |
Remove the O-ring from each oil control valve.
| *1 | O-ring |