Home › Engine / Hybrid System ยท 1AZ-FE › ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE

CAMSHAFT OIL CONTROL VALVE > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A134904
  1. Remove the 2 nuts and No. 1 engine cover sub-assembly.



2. REMOVE VACUUM HOSE CLAMP


    A128925
  1. Remove the bolt and vacuum hose clamp.



3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    A124556
  1. Disconnect the camshaft timing oil control valve assembly connector.

  1. Remove the bolt and camshaft timing oil control valve assembly.



    A090053E10
  1. Remove the O-ring from the camshaft timing oil control valve assembly.
    Text in Illustration 
    *1
    O-ring