CAMSHAFT POSITION SENSOR > INSTALLATION |
| 1. INSTALL CAMSHAFT POSITION SENSOR |
Camshaft position sensor (for Intake Side)
Clean and degrease the threads of the bolt for the camshaft position sensor.
Apply a light coat of engine oil to the O-ring of the sensor.
![]() |
Apply adhesive to 2 or 3 threads of the bolt.
| *1 | Adhesive |
Install the sensor with the bolt.
Connect the sensor connector.
Camshaft position sensor (for Exhaust Side)
Clean and degrease the threads of the bolt for the camshaft position sensor.
Apply a light coat of engine oil to the O-ring of the sensor.
![]() |
Apply adhesive to 2 or 3 threads of the bolt.
| *1 | Adhesive |
Install the sensor with the bolt.
Connect the sensor connector.
| 2. INSPECT FOR OIL LEAK |
| 3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY |
Fit the 3 retainers and install the No.1 engine cover sub-assembly.