Home › Engine / Hybrid System ยท 1AZ-FE › COOLING › THERMOSTAT

THERMOSTAT > REMOVAL

for Preparation Click here



1. DRAIN ENGINE COOLANT

NOTICE:
Do not remove the radiator cap sub-assembly or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

  1. Loosen the radiator drain cock plug.

  1. Loosen the cylinder block drain cock plug.



  1. Remove the radiator cap sub-assembly.


    A264832E01


    Text in Illustration 
    *1
    Radiator Cap Sub-assembly
    *2
    Radiator Drain Cock Plug
    *3
    Cylinder Block Drain Cock Plug
    -

    HINT:
    Collect the engine coolant in a container and dispose of it according to the regulations in your area.



2. DISCONNECT NO. 2 RADIATOR HOSE


    A129775
  1. Disconnect the No. 2 radiator hose.



3. REMOVE WATER INLET


    A180466
  1. Remove the 2 nuts and water inlet.



4. REMOVE THERMOSTAT
  1. Remove the thermostat.

  1. Remove the gasket from the thermostat.