CHARGING SYSTEM > Charge Warning Light Comes ON while Driving |
| 1.CHECK LOCK FUNCTION OF GENERATOR PULLEY WITH CLUTCH |
Check the lock function with the pulley installed in the vehicle.
Visually check that the rotor in the generator operates with the engine running.
Check the lock function with the pulley removed from the vehicle.
Remove the generator pulley cap.
![]() |
Hold the generator rotor using SST, and turn the generator pulley with clutch clockwise to check that the outer ring locks .
| *a | Free |
| *b | Lock |
|
| ||||
| OK | |
| 2.CHECK INSTALLATION OF GENERATOR PULLEY WITH CLUTCH |
Start the engine and visually check the generator pulley with clutch for looseness.
|
| ||||
| OK | ||
| ||