Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER (w/o Smart Entry and Start System)

DOOR CONTROL TRANSMITTER (w/o Smart Entry and Start System) > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY


    B213774
  1. Install the door control transmitter module set sub-assembly into the transmitter housing case.



2. INSTALL TRANSMITTER HOUSING COVER


    B213770
  1. Install the transmitter housing cover to the transmitter housing case.

  1. Check that the transmitter LED illuminates when the switch is pressed.

    OK:
    Transmitter LED illuminates when switch is pressed.