Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER (w/o Smart Entry and Start System)

DOOR CONTROL TRANSMITTER (w/o Smart Entry and Start System) > REMOVAL

for Preparation Click here



1. REMOVE TRANSMITTER HOUSING COVER


    B213771E01
  1. Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.
    Text in Illustration 
    *1
    Protective Tape

    NOTICE:
    Do not forcibly pry the cover.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY


    B213773E01
  1. Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.
    Text in Illustration 
    *1
    Protective Tape

    NOTICE:
    Handle each part with care as they are delicate electrical parts.

    HINT:
    Tape the screwdriver tip before use.