Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL REAR COMBINATION LIGHT BRACKET


    E231316
  1. Install the rear combination light bracket with the 2 screws.



2. INSTALL REAR BUMPER UPPER SIDE RETAINER


    E227532
  1. Engage the claw to install the rear bumper upper side retainer as shown in the illustration.



3. INSTALL TAIL AND STOP LIGHT BULB
  1. Install the tail and stop light bulb to the tail and stop light socket.



    E227530
  1. Turn the tail and stop light socket with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.



4. INSTALL REAR TURN SIGNAL LIGHT BULB
  1. Install the rear turn signal light bulb to the rear turn signal light socket.



    E226767
  1. Turn the rear turn signal light socket with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.



5. INSTALL REAR COMBINATION LIGHT PACKING


    E226765
  1. Install a new rear combination light packing.