REAR SEAT ASSEMBLY (for Reclining Seat Type) > DISASSEMBLY |
| 1. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for LH Side) |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat center shoulder belt guide.
| 2. REMOVE REAR SEAT SHOULDER BELT GUIDE LH (for LH Side) |
![]() |
Remove the 2 screws.
Disengage the guide and remove the rear seat shoulder belt guide LH.
| 3. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side) |
![]() |
Disengage each hooks.
Remove the 12 hog rings.
w/ Rear Seat Side Airbag:
![]() |
Remove the nut and separate the airbag bracket.
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports.
w/ Seat Heater System:
Disengage the clamp to disconnect the seat heater wire harness from the rear seatback frame sub-assembly LH.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.
| 4. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side) |
![]() |
Remove the 10 hog rings and separate type rear seatback cover from the separate type rear seatback pad.
| 5. REMOVE REAR SEAT AIRBAG ASSEMBLY LH (for LH Side) |
w/ Rear Seat Side Airbag:
Remove the rear seat airbag assembly LH .
| 6. REMOVE REAR SEAT SHOULDER BELT GUIDE RH (for RH Side) |
| 7. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side) |
| 8. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side) |
| 9. REMOVE REAR SEAT AIRBAG ASSEMBLY RH (for RH Side) |
w/ Rear Seat Side Airbag:
Remove the rear seat airbag assembly RH .
| 10. REMOVE CENTER SEAT ARMREST INNER PLATE |
![]() |
Disengage the 6 claws and separate the 4 guides, and remove the center seat armrest inner plate.
| 11. REMOVE REAR CENTER SEATBACK FRAME WITH COVER AND PAD |
![]() |
Remove the 2 nuts.
Disengage the 2 claws and remove the rear center seatback frame with cover and pad.
| 12. REMOVE CENTER SEAT ARMREST BRACKET SUB-ASSEMBLY |
![]() |
Disengage the 3 clamps.
Remove the 2 bolts, 2 washers and center seat armrest bracket sub-assembly.
| 13. REMOVE REAR SEAT CENTER ARMREST BOX ASSEMBLY |
![]() |
Disengage the 4 hooks and remove the rear seat center armrest box assembly from the rear seat center armrest.
| 14. REMOVE COOLER CONTROL SWITCH ASSEMBLY |
![]() |
Remove the 2 screws.
Separate the guide and remove the rear seat center armrest door sub-assembly.
![]() |
Remove the screw.
Using a moulding remover, disengage the 8 claws and 3 guides, and remove the rear seat armrest plate.
![]() |
Disengage the 4 claws.
![]() |
Disconnect each connector to remove the cooler control switch assembly.
| 15. REMOVE REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY |
![]() |
Disengage the guide.
![]() |
Disengage the 3 clamps and turn back the rear seat center armrest cover as shown in the illustration.
![]() |
Disconnect the connector.
![]() |
Using a screwdriver, disengage the claw and remove the rear No. 1 power outlet socket assembly as shown in the illustration.
| *1 | Protective Tape |
| 16. REMOVE REAR POWER OUTLET SOCKET COVER |
![]() |
Disengage the 2 claws and remove the rear power outlet socket cover as shown in the illustration.
| 17. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY |
![]() |
Remove the 2 screws and rear seat center armrest cup holder sub-assembly as shown in the illustration.
| 18. REMOVE REAR SEAT WIRE |
![]() |
Disengage each hook as shown in the illustration.
![]() |
Disengage the 3 clamps and remove the rear seat wire.
| 19. REMOVE REAR SEAT HEADREST SUPPORT |
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports.
| 20. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY |
![]() |
Disengage the 4 hooks and remove the center seatback cover with pad.
![]() |
Remove the center seatback cover sub-assembly from the center seatback pad sub-assembly.
| 21. REMOVE REAR SEAT RECLINING ADJUSTER ASSEMBLY LH |
![]() |
Disconnect the connector.
Remove the 3 bolts and nut, and rear seat reclining adjuster assembly LH.
| 22. REMOVE REAR SEAT RECLINING ADJUSTER ASSEMBLY RH |
| 23. REMOVE BENCH TYPE REAR SEAT CUSHION COVER |
Remove the 40 hog rings.

Remove the 24 hog rings and bench type rear seat cushion cover from the bench type rear seat cushion pad.
