GENERATOR > INSTALLATION |
| 1. INSTALL GENERATOR ASSEMBLY |
Install the generator assembly with the 2 bolts.
Connect the wire harness clamp.
Install the generator bracket with the 2 bolts.
Connect the generator connector to the generator assembly.
Install the generator wire with the bolt.
Install the nut and connect the wire harness to terminal B.
Install the terminal cap.
| 2. INSTALL V-RIBBED BELT |
| 3. INSTALL RADIATOR ASSEMBLY |
| 4. INSTALL V-BANK COVER SUB-ASSEMBLY |
Fit the 3 retainers and install the V-bank cover sub-assembly.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |