Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR

INNER REAR VIEW MIRROR > INSTALLATION

for Preparation Click here



1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY
  1. Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.

    Torque:
    1.8 N*m{ 18 kgf*cm , 16 in.*lbf }

  1. Connect the connector.



2. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER
  1. Engage the 6 claws and temporarily install the inner rear view mirror stay holder cover.



    B281436
  1. Slide the inner rear view mirror stay holder cover in the direction indicated by arrow shown in the illustration and engage the 2 claws to install the cover.